Sawstop Table Saw
|
|
Freud SD508 Super Dado 8-Inch Stack Dado $179.97 Enhance the quality of your dadoes with Freud’s SD508 Eight-Inch Super Dado Set with Anti-Kickback Design. Designed to produce smooth, chip-free dadoes and grooves every time, this set is designed to take on a wide range of materials, from hardwoods to laminates. For exceptional precision, the blade width can be adjusted in 1/32-inch increments, while the included shim set allows for even finer ad… |
|
|
SawStop TSBC-10R2 Table Saw Brake Cartridge for 10-Inch Blades $69.00 The revolutionary SawStop protection starts here! This is the Standard SawStop brake cartridge for 10″ saw blades. It fits all models of SawStop table saws (except for older models). Current SawStop models use cartridges with blue tinted plastic cases and 9-pin connectors. If you have an older model with a clear case and a 15-pin connector, you will need a different cartridge; please call SawStop … |
|
|
Delta 78-989 Biesemeyer T-Square Dual Pointer Cut-Off Saw Stop $99.40 Biesemeyer 78-989 T-square Dual Pointer Cut-Off Saw Stop eliminates the need for cumbersome C-clamps. This Biesemeyer cut-off stop is designed to glide effortlessly along a 1-1/2-x-1-5/8-inch fence. Just a twist of the wrist and the stops are securely in place. Constructed of rugged steel components, this stop is hand-calibrated at the factory for added precision, and its hairline pointer provides… |
|
|
SawStop CNS-JSC Jobsite Cart for SawStop Contractor Saws $199 The SawStop CNS-JSC is a Jobsite Cart for the Saw Stop 30-Inch contractors table saw (sold separately). It can also be used for the Saw Stop 36-Inch contractors table saw (sold separately). |
|
|
SawStop Contractor Saw CNS175-TGP36 with 36-Inch Professional T-Glide Fence Syst $1949 The SawStop CNS175-TGP36 Contractor Saw package features a 36" Professional T-Glide Fence System with table, 1.75 HP motor and of course, SawStop's famous safety mechanism. The SawStop safety system detects when someone accidentally contacts the spinning saw blade, and then stops the blade in milliseconds. In most cases, such an accident would result in just a nick on a SawStop contractor saw, instead of the devastating injury which would likely occur on an ordinary table saw. Not only are SawStop Contractor Table Saws the safest table saws on the market, they are also exceptionally high quality machines that are consistently ranked at the top of their class. The SawStop contractor saw was designed to be the best you can buy, with a massive 62 mm main bearing, heavy-duty arbor shaft, cast iron trunnions and arbor block, solid cast iron table with removable extension wings, dust-collecting blade shroud, and a 1¾ horsepower motor — and of course SawStop's revolutionary contact detection and brake system. What's In The Box SawStop CNS175 Body 36" Professional T-Glide Fence System Assembly, including table Note: Mobile base depicted in the picture above is sold separately. See "Related Items" tab to view more information or to add this accessory. |
|
|
SawStop Contractor Saw CNS175-SFA30 10-Inch w/ 30-Inch Aluminum Extrusion Fence $1749 The SawStop CNS175-SFA30 Contractor Saw package features a 30" aluminum extrusion fence, 1.75 HP motor and of course, SawStop's famous safety mechanism. The SawStop safety system detects when someone accidentally contacts the spinning saw blade, and then stops the blade in milliseconds. In most cases, such an accident would result in just a nick on a SawStop contractor saw, instead of the devastating injury which would likely occur on an ordinary table saw. Not only are SawStop Contractor Table Saws the safest table saws on the market, they are also exceptionally high quality machines that are consistently ranked at the top of their class. The SawStop contractor saw was designed to be the best you can buy, with a massive 62 mm main bearing, heavy-duty arbor shaft, cast iron trunnions and arbor block, solid cast iron table with removable extension wings, dust-collecting blade shroud, and a 1¾ horsepower motor — and of course SawStop's revolutionary contact detection and brake system. What's In The Box SawStop CNS175 Body 30" Aluminum Extrusion Fence System |
|
|
SawStop Contractor Saw CNS175-TGP52 with 52 Inch Professional T-Glide Fence Syst $2049 The SawStop CNS175-TGP52 Contractor Saw package features a 52-Inch Professional T-Glide Fence System with table, 1.75 HP motor and of course, SawStop's famous safety mechanism. The SawStop safety system detects when someone accidentally contacts the spinning saw blade, and then stops the blade in milliseconds. In most cases, such an accident would result in just a nick on a SawStop contractor saw, instead of the devastating injury which would likely occur on an ordinary table saw. Not only are SawStop Contractor Table Saws the safest table saws on the market, they are also exceptionally high quality machines that are consistently ranked at the top of their class. The SawStop contractor saw was designed to be the best you can buy, with a massive 62 mm main bearing, heavy-duty arbor shaft, cast iron trunnions and arbor block, solid cast iron table with removable extension wings, dust-collecting blade shroud, and a 1¾ horsepower motor — and of course SawStop's revolutionary contact detection and brake system. What's In The Box SawStop CNS175 Body 52" Professional T-Glide Fence System Assembly, including table |
|
|
SawStop OFT30CNS000 30-inch Out-Feed Table $99.99 The SawStop OFT30CNS000 is a 30-Inch Out-Feed Table. |
|
|
SawStop TSA-ODC Overarm Dust Collection with 1-1/2-inch to 4-inch Y Connector an $199 The SawStop TSA-ODC Overarm Dust Collection with 1-1/2-inch to 4-inch Y Connector and Tubing provides superior dust collection capabilities on your SawStop table saw. A custom Y-port unites above and below-table dust collection into a single 4-inch port. Fits with any SawStop table saw model regardless of fence size or style but you will need the TSG-DC, which is Not Included. Features: Overarm solution connects directly to the TSG-DC dust collection blade guard – Not Included Custom Y-Port prevents you from having to run multiple dust collector hoses What's In The Box: SawStop TSA-ODC Overarm Dust Collection with 1-1/2-inch to 4-inch Y Connector and Tubing |
|
|
SawStop TSDC-8R2 8-Inch Dado Brake Cartridge for ICS,PCS and CNS SawStop Saws $89 Tool King is unable to accept returns on SawStop brake cartridges in order to preserve the quality of each cartridge's safety mechanism. The SawStop TSDC-8R2 8-Inch Dado Brake Cartridge for ICS,PCS and CNS SawStop Saws is the magic behind the SawStop. In order to stop the saw, the replaceable fast-acting brake stops the blade when contact is detected. The brake includes a heavy-duty spring to push a block of aluminum, called a brake pawl, into the teeth of the blade to stop the blade from spinning. The spring is held in compression by a fuse wire until contact is detected. When contact is detected, the system sends a surge of electricity through the fuse wire to burn the wire and release the spring. The spring pushes the brake pawl into the teeth of the spinning blade, and the teeth cut into the aluminum and bind, thereby stopping the blade. All this happens in about 3–5 milliseconds, or 1/200th of a second. At the same time, the angular momentum of the blade causes the blade to retract below the table and the power to the motor is shut off. Compatible with all woods and other non conductive materials, this SawStop TSDC-8R2 will work with all standard 8-inch dado sets up to 13/16-inch thick. Features: Brake cartridge will stop dado stack as soon as anything conductive touches it while in motion Brake initiates, fires and stops blade within 1/200th of a second What's In The Box: SawStop TSDC-8R2 8-Inch Dado Brake Cartridge for ICS,PCS and CNS SawStop Saws |
|
|
SawStop MBCNS000 Contractor Saw Mobile Base $160 Simple one-foot operationFully-welded 1/4" rigid steel construction * Hard-wearing black powder-coat finishDurable polyurethane wheels – 2 fixed-direction wheels and 2 360° castors for easy positioningEasy-to-follow assembly instructionsThis mobile base cannot be used in conjunction with the Contractor Saw's out-feed table |
|
|
SawStop TSBC-10R2 10-Inch Standard Brake Cartridge for ICS,PCS & CNS Series $69 Tool King is unable to accept returns on SawStop brake cartridges in order to preserve the quality of each cartridge's safety mechanism. The SawStop TSBC-10R2 10-Inch Standard Brake Cartridge for ICS,PCS & CNS Series SawStop Saws is the magic behind the SawStop. In order to stop the saw, the replaceable fast-acting brake stops the blade when contact is detected. The brake includes a heavy-duty spring to push a block of aluminum, called a brake pawl, into the teeth of the blade to stop the blade from spinning. The spring is held in compression by a fuse wire until contact is detected. When contact is detected, the system sends a surge of electricity through the fuse wire to burn the wire and release the spring. The spring pushes the brake pawl into the teeth of the spinning blade, and the teeth cut into the aluminum and bind, thereby stopping the blade. All this happens in about 3–5 milliseconds, or 1/200th of a second. At the same time, the angular momentum of the blade causes the blade to retract below the table and the power to the motor is shut off. Compatible with all woods and other non conductive materials, this SawStop TSBC-10R2 will work with all standard 10-inch blades. Features: Brake cartridge will stop blade as soon as anything conductive touches it while in motion Brake initiates, fires and stops blade within 1/200th of a second What's In The Box: SawStop TSBC-10R2 10-Inch Standard Brake Cartridge for ICS,PCS & CNS Series SawStop Saws |
|
|
SawStop TSG-DC Blade Guard with Integrated Dust Collection $139 The SawStop TSG-DC Blade Guard with Integrated Dust Collection for SawStop Saws brings dust collection capabilities to your SawStop Contractor Saw with the CNS Dust Collection Accessory Kit. Features: Brings saw’s dust collection capabilities to 99 percent Low profile to allow for cuts as narrow as 3/4-inch What's In The Box: SawStop Dust Collection Blade Guard TSG-DC |
|
|
Tenryu GM-25540-2 10-Inch 40-Tooth Full Kerf Blade for Sawstop $81.92 The Tenryu GM-25540-2 is a 10-Inch 40-Tooth Full Kerf Blade for the Sawstop Saw. This is the top of the line choice for the serious craftsman who wants one superior blade for most all woodworking. Saw plate run-out less than .002-inch for flat true run. Built-in dampening system reduces vibration, making cuts quieter and more precise. Performs smooth, easy crosscuts and rips. Even does a great job on double sided laminates. Carbide tip material is an extra hard, C-4 and super fine grain with corrosion inhibitors to give the keenest edge and longest sharp-life. Features: ATB (Alternative Top Bevel) Typical for cross-grain. Also used on ripping blades Fully-hardened, expertly-tensioned tool steel body for true and accurate cuts, meticulously hand hammer tensioned. A new grade of extra hard carbide resists both abrasive and chemical wear better than standard grades for longer life. Resin bond-filled expansion slots to absorb any vibration and for quieter cutting. Fine grit honing ensures mirror finish on carbide for the keenest possible edges and a super clean cut What's In the Box: Tenryu GM-25540-2 10-Inch 40-Tooth Full Kerf Blade for Sawstop |
|
|
SawStop CNSCIWA Cast Iron Wing Assembly (Pair) $189 The SawStop CNSCIWA is a Cast Iron Wing Assembly Pair. |
|
|
DEWALT DW7440RS Rolling Table Saw Stand $159.99 Rolling Table Saw Stand – DW7440RS |
|
|
Milwaukee 48-08-0260 Portable Band Saw Table $289.99 Portable Band Saw Table – 48-08-0260 |
|
|
DEWALT DW7470 Table Saw Miter Gauge $149.99 Table Saw Miter Gauge – DW7470 |
|
|
Table Saw Cake Knife $6.99 Table Saw Plastic Cake Knife, perfect for cutting cakes and many other food items, this is a must have kitchen tool |
|
|
Bosch TS1005 Table Saw Zero Clearance Insert $8.99 Table Saw Zero Clearance Insert – TS1005 |
|
|
Bosch TS1004 Table Saw Dust Collection System $15.99 Table Saw Dust Collection System – TS1004 |
|
|
Powermatic 2042335 66 Table Saw Mobile Base $259.99 Mobile Base for 66 Table Saw – 2042335 |
|
|
Powermatic 1791788 PM2000 Table Saw Dado Insert $59.99 Dado Insert for PM2000 Table Saw – 1791788 |
|
|
Delta 36-050 Delta Table Saw Push stick $15.99 Delta Table saw Push stick – 36-050 |
|
|
DEWALT DW7450 Table Saw Stand for DW745 $79.99 Table Saw Stand for DW745 – DW7450. Hardware Bag |
|
|
Bosch TS1007 Table Saw Dado Cutter Insert $15.99 Table Saw Dado Cutter Insert – TS1007 |
SawStop Table Saw Demo